RV Rubber roof has a tendency to develop a layer of oxidization that must be removed by cleaning with acetone. Remove any loose rv roof coatings or rv roof sealants that are not adhering well to the rv roof. Immediately after cleaning, apply tape to all seams. Remove about 1″ of the liner from the tape and press it down at your starting position for rv roof repair. Pull the liner from underneath and press the tape as you go, gradually releasing the liner so that the adhesive rv roof surface does not come in contact with itself or unintended rv roof surfaces. RV roof coating of bonding Roof Primer must then be applied to the rv rubber roof surface to prevent any further oxidization. Do not cover the tape with primer.

There are some tips which must be kept in mind before applying liquid rubber on your roof. Be aware that it is a 3 to 6 hrs process, excluding the surface preparation time. Once the liquid EPDM Rubber is applied, it takes around 16 to 20 hours to dry up. Therefore proper management of time is necessary. Careful planning regarding weather conditions should be done as well, i.e. one should plan to work on days when the rain is not expected because although Liquid Roof will immediately waterproof, even when wet, avoid heavy rain until it is completely dry to the touch which means 16 – 20 hours after application. To be on the safe side, one can say that a full cure will be achieved in 4 – 10 days after application, in consistent 70 deg F.

The best leak is the one that never happens. This can only be accomplished with regular maintenance of your rv which means re-sealing the seams and penetrations on a yearly basis. However, if your RV ever does spring leaks, for any reason, then the best leak an RV can develop is the one you see because it results in a drip inside the RV. It is the one you do not see that will ruin your beautiful dream machine! Leaks and tears in an RV can quickly lead to more expensive rv leaks repair. Such leaks can allow moisture to access the inner structure of the vehicle. RV leaks repair and rv roof maintenance is now very easy with liquid rubber and liquid roof coating.

If your RV has a damaged roof with leaks, then you could be suffering a great deal of stress and concern. With Liquid Roof, RV roof repair and maintenance has never been easier. This RV rubber coating is maintenance free and installs in one easy coat with no primer. You can be on the road again in no time with no spring leaks. After repairing you RV with liquid roof repair, simply keep up with your routine maintenance and your rv roof should last for a long time to come.

Therefore, it is vitally important that owners carry out regular inspections of their mobile home roofs. A regular inspection means 4 or 5 times a year, or even more if you can. One of the reasons you need to inspect it so often is that, especially in the case of someone who doesn’t live permanently in their RV Trailer, there might not be anyone around to notice the roof leaking for quite some time, by which time the ceiling may already be stained and irreparable damage caused.

A thorough inspection of an RV trailer roof is not a five minute job. Be prepared to invest some time carefully checking your roof so that you don’t miss anything. Any roof inspection should include such necessities as checking inside the mobile home as well. Be sure to inspect the walls on the inside where the roof sheets are connected to the edges of these walls. This might mean you have to open closets and cabinets in order to properly check every part. The thing you are looking for during these checks is any sign of dampness or water damage to the walls and/or fittings in the home.

Ceiling discoloration or staining might well be an indication that there is a leakage somewhere on the roof. Check the discoloration carefully. If it is only slight, then the roof leak is unlikely to be a major one and can probably be fixed with by simply applying a sealant. If the discoloration is particularly bad though, or if you can see any rotten or mildewed wood, then this is a sure sign of a serious leak, and the need for major roof repairs is likely.

During your inspections, make sure that you check the top of your mobile home to learn the locations of all the air vents, air conditioning vents and anything else that will require waterproofing. All of these points are common sources of leaks in a mobile home roof. All of these items should be checked both inside and outside for any signs of leakages.

Another common leakage that is difficult to find is leaks that are close to the running lights. The lights are sealed with a rubber gasket that fixes it to the body of the mobile home. These areas have to be checked very carefully, as the rubber gasket can wear out after some time. If you notice a leak here, you can either buy a replacement gasket, or perhaps more conveniently, seal the leakage with a silicone caulk. If undetected, a leak here could cause some serious deterioration to the walls and floor of your mobile home.

A single application is preferable to multiple coats. On flat surfaces, material can be poured, spread with a squeegee and then evened out with a short nap roller. You can also use a paintbrush for small areas such as fish ponds, pipes, chimneys and roof flashing’s. Touch ups may be applied as desired after initial film has cured and surface is Liquid roof Brush first wiped with solvent. To insure its effectiveness it must be applied at a 20 mil layer. Apply with brush around flashing’s and edges using long, slow strokes. The Product will level itself when sufficient material has been applied. EPDM Liquid Roof bonds very well to these coatings. Some of the earlier acrylic elastomeric formulations were prone to the development of under film corrosion. There usually is little visual evidence of this on the surface of the acrylic so small sections of coating must be removed from different parts of the roof to determine whether the condition exists and how severe it is. A visual inspection of the underside of the roof panels can reveal total penetration in the most severe cases. Application of Liquid Rubber EPDM

Physical Properties

The physical properties of Liquid Rubber(R) are typical of its EPDM chemistry. The outstanding characteristics include:

Extreme high resistance to penetration of water. Ultra Violet and Ozone stable. Excellent long term aging properties.

Very broad temperature tolerance range (from 300 degrees F to minus 62 degrees F). Acid and alkali resistant

Withstands ponding water even when not cured

Spreading Rate A 20 mil dry film will result when liquid is applied at the rate of 42 sq. ft per gallon on a smooth surface.

A rate of 45 sq. ft allows for average roughness.
Weight/gallon 8 pounds (mixed)
Tensile 680 psi
Elongation 180-200%
Brittle Point -62 degrees F.

Liquid Roof Application

Liquid Roof’s one-coat application saves you time and money sealing and protecting your roof from roof leaks. Easily applied over Metal, Rubber, Fiberglass, Concrete, Fabric and Foam! No primer or top coat needed. Liquid roof can be applied with a paint brush, roller or squeegee. Liquid Roof liquid rubber is super-strong and waterproof, and is able to survive tremendous temperatures of warmth and chilly.

Liquid Roof Features

Some of the unique benefits of the liquid roof are:

• Can be applied over all roofing materials;
• UV and ozone resistant;
• Excellent against ponding water;
• Waterproofs IMMEDIATELY;
• Not damaged by freezing and has long term flexibility;
• Final cured properties not damaged by adverse conditions;
• ONE coat application.

Liquid Rubber Coatings For Roof Repair

Its Uses

• Metal – Coated or Galvanized Steel Weathered Aluminium
• Weathered Copper
• EPDM Rubber membrane
• Concrete (except foot traffic surfaces)
• Urethane Foam
• Primed Wood
• Fiberglass EPDM lined fish ponds
• PVC Sheet and Pipe
• Acrylic Sheet
• Sponge Rubber insulation
• EPDM Rubber Membrane on flat or sloped Roofs
• Weathered Steel Siding
• Weathered Fiberglass
• Weathered standing seam and corrugated metal roofs
• Weathered Vinyl, PVC and Polycarbonate plastic
• Foam insulation for pipe
• Cast Concrete foundations

Liquid Rubber coating has 700% elasticity. Liquid Rubber forms a waterproof and seamless coating when dry after the application. Liquid Rubber retains its specifications in the temperature range of-20C to + 80C due to its resistance to UV and sunlight, can be used with full confidence even on places such as terraces and roofs that are under exposure to intense sunlight. Liquid roof features very high flexibility and crack-bridging ability.

EPDM Coatings have Liquid Roof and Liquid Rubber which are the most suitable products for stop the leaking roofs. Metal Roofing magazine has awarded EPDM, top 10 products of 2009.

RV Roof Repair and RV Roof Maintenance are essential for preserving the value of your RV investment. Motor house and RV rubber roof repair and preservation is a necessary stair in guaranteeing the durability of your speculation. The majority of manufacturers of RVs and motor houses fix rubber (EPDM) or TPO roofs on their automobiles for the reason that they are frivolous and elastic, while a few prefer fibreglass or aluminium for the reason that they give a firm outside. The entire are smooth looking. On the other hand, rubber and TPO roofs are extra vulnerable to harm, particularly as of above your head matters such as twigs; whereas aluminium roofs are extra vulnerable to strain fractures and hollowing from corrosion. The end result is that the entire RV rubber roofs, left unattended resolve finally seep out. The elastomeric roof coatings have low dirt pick up and sealing feature will drastically reduce unsightly streaks that are so hard to remove from rv siding.
By following the instructions below, you can reasonably expect 20 years of dry, maintenance free protection for your RV roof leaks repair.

Before ordering, determine if your roof is aluminium, fibreglass, steel or rubber sheeting. Measure all seams of RV roof including the outside edges, cross seams and around all vents, pipes or air conditioners. These RV roof seams must be covered with Roof Seal Tape from any of epdmcoating’s seam tape before RV roof coating and we need to know how many feet of tape you will need for rv roof leaks repair.
RV Rubber roof has a tendency to develop a layer of oxidization that must be removed by cleaning with acetone. Remove any loose rv roof coatings or rv roof sealants that are not adhering well to the rv roof. Immediately after cleaning, apply tape to all seams. Remove about 1″ of the liner from the tape and press it down at your starting position for rv roof repair. Pull the liner from underneath and press the tape as you go, gradually releasing the liner so that the adhesive rv roof surface does not come in contact with itself or unintended rv roof surfaces. RV roof coating of bonding Roof Primer must then be applied to the rv rubber roof surface to prevent any further oxidization. Do not cover the tape with primer.
If you have a few tools and a friend who can help you then you can repair your RV roof by Do-it-yourself Rv roof leaks repair which is almost inevitable in RV roof leaks repair.

USES
Asphalt Roofs, Built Up Roofs (BUR), Concrete Roof Repair, Masonry, Metal Roofs, Modified Bitumen, Polyurethane Foam Roofs, Single Ply Roofs and Wood.

FEATURES
Provides a seamless, durable membrane. Superior adhesion to various substrates. Contains fungicides and mildewcides. Excellent UV protection for polyurethane foam. Heat reflective coating helps reduce cooling costs. Reflects the sun’s UV-rays and prevents premature degradation. Prevents premature roof failure by controlling thermal cycling. Easy to use, non-toxic and VOC compliant water based coating.

PACKAGING
5 gallon buckets, 55 gallon drums.

PREPARATION
All surfaces to be coated must be clean, dry and free of any oil, grease or dirt. Any existing coating must be checked for good adhesion. Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility.

APPLICATION
EnergyGuard Acrylic Roof Coating is ready to use. Thinning is not recommended. Containers
should not be left open for extended periods of time.
Follow our roof restoration procedures and always perform a coating adhesion test before doing
the entire roof.
Spray: Airless Sprayer, 1gpm, 3,000 psi, .025 or .031 tip.
Brush: Good quality synthetic bristle brush.
Roller: Short nap roller.
Clean Up: Water
Caution: EnergyGuard Acrylic Roof Coating is a water-based product which will freeze and become unusable at temperatures below 32°F. Suspend all application if conditions prevent a complete cure before sunset, rain, fog, dew or freezing temperatures. Coatings must be completely dry before exposing to water or foot traffic. Keep containers covered when not in use. Dispose of all containers in accordance with state and local environmental regulations. Keep away from children. If ingested, DO NOT induce vomiting. Call Physician immediately.